OptiCam P1
Watch it all - anywhere, anytime...
The OptiCam P1 is a small, highly useful network camera. It is easy to set up and can be placed almost anywhere. With its own IP address and built-in web server, it connects directly to your network, yet it can be remotely accessed from any standard Internet browser.
It features superior image quality in three different resolutions, up to VGA (640x480). It transfers up to 30 frames per second in CIF(320x240) mode and supports up to 4 users simultaneously. Password protection may be used to restrict viewer's access. With simple installation, you can easily and affordably setup multiple camera.

 
 
  Image sensor
Advanced color CMOS image sensor
  Pixel Count
0.30 Megapixel
  Focal Length
f = 4.5mm
  F-Stop
f =2.4
  Field of view
54 degrees
  Minimal Illumination
2 Lux(Normal) / 0.7Lux(w/frame rate low)
  Compression
Motion-JPEG
  Backlight Compatibility
Yes
  Image Sizes
(VGA)640x480, (CIF)320x240, (QSIF)160x120
  Preset Position
4 Positions
  Maximun Frame Rates
(VGA)640x480/10 fps, (SIF)320x240/30 fps, (QSIF)160x120/30fps
  Auto B/W
Yes (selectable)
  E-mail Notification
Alarm in and IP Address change
  Ethernet
RJ45 (10 Base-T / 100 BASE-TX)
  I/O Connector for Sensor
G GND
1.External Sensor Input
2.G GND
3.External Device Control Output
4.DC Power Output Terminal
(Maximum 12V DC of 100MA Load) Driver Sis Possible
  Protocols
FTP, HTTP, PPPoE, SMTP, DNS, DHCP, SNTP, DDNS
  Software AP
Motion Detection, Storage, FireWare Update
  System Requirements
Microsoft Windows 2000, or XP
Intel Pentium III 500, Cerelon, AMD Athlon (higher recommended)
256 MB RAM or higher
  Software Requirements
Microsoft Internet Explorer 6.0 or higher
   
 
 
 
 
 
 
 
 
 
 
 
 
Home | Mail | Contact | About
Copyright © 2008 MicroFilm Egypt Co.